3. 增加混凝土強度、降低混凝土脆性，提高泡沫混凝土質量性能，泡徑比傳統泡徑縮小50%，破泡率降低90%以上；

4. 跟多種標號的水泥有良好的適配型；

5. 性?xún)r(jià)比高，稀釋比例1：100，平均每立方泡沫混凝土只需3-4元；

適用范圍

    KH復合發泡劑主要應用于免蒸加氣混凝土砌塊、墻體的生產制作。其可對水泥、氧化鎂、石灰、石膏、石粉、鋸末、粉煤灰、沙、造紙廢渣白泥等多種原材料發泡，制成泡沫混凝土砌塊、 隔墻板、板條、空心磚、實心磚、熱力管道保護套、屋頂隔熱板等多種輕質泡沫建材，也可用于屋面、地暖、室內保溫隔熱隔音墊層制作。

技術參數：

KH復合水泥發泡劑與其他廠家水泥發泡劑對比 ：

  KH復合水泥發泡劑強度較傳統均提高10%。強度提升原理新型材料的細小均勻氣泡泡徑比傳統泡徑縮小50%，僅0.1至0.3毫米，特有的加強韌性的功效，使得破泡幾率大大降低90%以上。

KH composite foaming agent

KH composite foaming agent -- the first own R & D

Department of KH composite cement foaming agent is developed by our company the most new generation of concrete additives. Through molecular structure design and material selection formula and the development process of orthogonal test of a new generation of KH high efficiency foaming agent. Professional for the production of foam concrete block, lightweight partition board, mine tunnel backfill. The foam has high reliability, independent small closed pollution-free, its performance is neutral, soluble in water, foaming at room temperature. Can produce a lot of bubbles in the cement paste, bubble is independent and uniformly distributed in the cement paste, the formation of a large number of closed pores. A barrel of foaming agent (200kg) can produce about 500 cubic meters of foaming cement.

The main raw material

The use of non-polluting import materials and plant and animal protein, regardless of any side effect to the producers and users and the environment are not.

Performance characteristics

1.        Has good foam ability, foam as well as small, independent and uniform;

2.        Has good stability, settlement low (1H ≤ 7.5mm), bleeding a small amount of water (1H ≤ 41.1g);

3.        To increase the strength of concrete, reduce the brittleness of concrete, improve the quality of foam concrete;

4.        With a variety of grade cement has good adaptation type;

5.        High ratio of performance to price.

Scope of application

KH composite foaming agent is mainly used in the non-autoclaved aerated concrete block wall, production. It may be cement, magnesia, lime, gypsum, limestone powder, sawdust, fly ash, sand, paper sludge and other raw materials, foam, made of foam concrete block, wall panels, panels, hollow brick, solid brick, heat pipe protection cover, roof insulation foam board and other lightweight building materials, can also be used for the roof, floor heating, indoor noise insulation cushion production.